Toner Power Cable
 |
US $79.00
Hp Laserjet Error Codes, What They Mean & How to Fix Those Error Codes
The HP LaserJet has certainly made life easier with its power packed features. However, at the end of the day it is a machine and like all machines is bound to give errors. Here is a list of common error codes along with troubleshooting tips for each HP LaserJet printer right from model number 2 till 9500.
Error code 02: Warm up issues
This error code means it is taking over 3 minutes for your HP LaserJet printer to switch on. Make sure to check the I/O cable for loose connection. There may also be a communication issue between the printer and cable. It could indicate a faulty D.C. power outlet or formatter PCA.
Error code 11: Out of paper
This means that your HP LaserJet is most likely short of paper. Check to see if the sensor arm of the paper tray is damaged or caught somewhere. Check if the tray is empty of paper. It could also be that the paper cassette is missing or the PS2 flag is damaged.
Error code 14: Absence of toner cart
Error code 14 indicates that the toner cartridge is either not properly seated or installed. It could also mean the sensitivity tabs are missing or that the toner cartridge itself is of bad quality. Make sure to check on the right hand tabs of the toner cartridge and that the switch actuator is not bent.
Error code 22: Configuration error
These error codes are typically associated with improper configuration for the computer or the printer. Make sure the I/O cable isn’t damaged. Check if the I/O port on the printer is damaged or not. Also check the EIO card inside slot X of your HP LaserJet printer. Check to see if it has overflowed.
Error code 30: PS error
PS errors refer to a postscript firmware problem. For this you will need to get a new firmware chip for your HP LaserJet to function normally again.
Error code 40: Transfer error
This usually means that there is a disconnection between data transferring from your PC to your HP LaserJet printer. However, it can be rectified if you check on the MIO card. It should have no defects.
Error code 52: Improper scanner speed
This error code implies that the HP LaserJet scanner is having faulty speeds. Check if the scanner motor is damaged and also check if the cable assembly is faulty or not. Sometimes this could be temporary as the scanner maybe facing startup issues.
Error codes 70 and 71: damaged MIO card
This indicates that the MIO card also called SIMMS is faulty or damaged. Either the SIMM slot or the SIMM itself is not compatible with your HP LaserJet printer. That means you will need to get a new SIMM which is compatible.
About the Author
This Article is written by James Kara Murat from PrintCountry.com, the contributor of Printer Reviews. More information on the subject is at HP LaserJet Error Codes, What They Mean & How to Fix Those Error Codes, and related resources can be found at Hp Ink Cartridges.
|
|
USB Power Cable - Power cable $4.99 Black Box USB Power Cable - Power cable |
|
|
Power cable $9.99 LaCie - Power cable |
|
|
power cable $62.99 Intermec - Power cable |
|
|
StarTech.com IBM Power Cable Power Cable 10ft $19.73 StarTech.com IBM Power Cable Power Cable 10ft |
|
|
Cisco Power Cable Power (M) Power Cabaca $44.7 Cisco Power Cable Power (M) Power Cabaca |
|
|
Cisco Power Cable Power (M) Power Cabace $44.7 Cisco Power Cable Power (M) Power Cabace |
|
|
Cisco Power Cable Power (M) Power CAB7513AC $27.07 Cisco Power Cable Power (M) Power CAB7513AC |
|
|
SATA Power Cable $1.16 SATA Power Cable |
|
|
serial / power cable $44.99 Unitech - Serial / power cable |
|
|
Cisco Power Cable CABAC2= $42.65 Cisco Power Cable CABAC2= |
|
|
Cisco Power Cable Cppwrcordna $15.78 Cisco Power Cable Cppwrcordna |
|
|
Copilot Cable Power And Surge $54.99 COPILOT CABLE POWER AND SURGE |
|
|
10A 15ft Power Cable $19.99 10A 15ft Power Cable |
|
|
Lowrance Power Cable $53 Lowrance Power Cable Power Cable. For use with red NMEA network |
|
|
Power cable - 6 ft $13.99 Antec - Power cable - 6 ft |
|
|
FPC2G - Power fuse cable $19.99 Metra FPC2G - Power fuse cable |
|
|
Power cable (120 VAC) $15.99 Cisco - Power cable (120 VAC) |